Ajax Security System3.60 - App Store

Bitte warten ... Die Verfügbarkeit der App-Liste wird überprüft.
Sie können Ergebnisse sehen in einige Sekunden.


Herausgeberbeschreibung

Das Ajax Sicherheitssystem hält Sie darüber informiert, was in Ihrem Space geschieht. Überwachen Sie den Status des Ajax Systems, erhalten Sie sofortige Benachrichtigungen und verwalten Sie Sicherheit, Videoüberwachung und Automatisierung über eine einzige intuitive Benutzeroberfläche.

IN DER APP:
- Schalten Sie Ihr System mit einem Fingertipp scharf und unscharf
- Überwachen Sie Ereignisse und Systemstatus in Echtzeit
- Erhalten Sie wichtige Benachrichtigungen auch im Lautlos-Modus
- Sehen Sie sich die visuelle Alarmverifizierung mit Fotos und Videos an
- Erstellen Sie Automatisierungsszenarien
- Verwenden Sie in Notfällen die mobile Paniktaste
- Verwalten Sie mehrere Spaces von einem Konto aus, und mehr

Über 4,5 Millionen Endnutzer in mehr als 180 Ländern weltweit vertrauen Ajax. Wir bieten Komplettlösungen für den Schutz von Haushalten und Unternehmen jeder Größenordnung. Ajax Produktportfolio umfasst über 300 Geräte für:
- Einbruchschutz
- Videoüberwachung
- Brandschutz und Sicherheit
- Komfort und Automatisierung

BAUEN SIE IHRE EIGENE SICHERHEIT UND IHREN KOMFORT MIT AJAX

EIN EINZIGES INTEGRIERTES ÖKOSYSTEM
Ajax ist ein einheitliches Ökosystem, in dem Einbruchschutz, Videoüberwachung, Brandschutz, Wasserleckageprävention und Automatisierung nahtlos zusammenarbeiten. Sie können neue Geräte hinzufügen und Ihr System bei steigendem Platzbedarf skalieren — ohne Kompatibilitätsprobleme, komplexe Einrichtung oder die Notwendigkeit, alles von Grund auf neu zu gestalten.

SOFORTIGE BENACHRICHTIGUNGEN MIT VISUELLEM NACHWEIS
Sie verpassen keine wichtigen Ereignisse und wissen genau, wann und wie Sie reagieren müssen. Wenn ein Einbruch, ein Brand oder ein Wasserleck erkannt wird, sendet die App eine kritische Meldung, der den Modus „Nicht stören“ durchbricht. Die visuelle Alarmverifizierung durch Ajax Kameras oder MotionCam-Melder hilft Ihnen, schnell zu verstehen, was vor Ort passiert.

VIDEOÜBERWACHUNG, DER SIE VERTRAUEN KÖNNEN
Sehen Sie sich Live-Videos an oder durchsuchen Sie das Archiv direkt in der App. Das Videomaterial wird mit den Systemereignissen synchronisiert, sodass Sie für jeden Alarm einen klaren visuellen Kontext und ein umfassendes Situationsbewusstsein erhalten. Zum Schutz der Daten verwenden Videostreams eine sichere, proprietäre Übertragungstechnologie. Die passwortlose Kamera-Authentifizierung minimiert zudem das Risiko eines unbefugten Zugriffs.

AUTOMATISIERUNG FÜR MEHR SICHERHEIT UND ROUTINEAUFGABEN
Stellen Sie Ihr System auf automatischen Betrieb ein. Ändern Sie Sicherheitsmodi nach einem Zeitplan, schalten Sie die Beleuchtung ein, wenn eine Bewegung erkannt wird, schalten Sie das Wasser im Falle eines Lecks ab oder steuern Sie Schlösser, Tore, Heizung und Haushaltsgeräte. Automatisierungsszenarien laufen im Hintergrund ab, auch ohne Internetverbindung, während Sie sich auf Ihre täglichen Aufgaben konzentrieren können.

PROFESSIONELLE ANTWORT, NUR EINEN KLICK ENTFERNT
Verbinden Sie Ihr System mit einem Überwachungsunternehmen, um professionelle Sicherheitsdienste mit schneller Alarmreaktion zu erhalten. Ajax Systeme werden von den größten Notruf- und Serviceleitstellen sowie einer großen Auswahl an Überwachungssoftware in mehr als 180 Ländern unterstützt. Im Notfall drücken Sie die Paniktaste in der App, um das Ereignis und den Standort Ihres Smartphones sofort an das schnelle Einsatzteam zu übermitteln.

• • •

Für die Nutzung der App sind Ajax Geräte erforderlich.
Die Geräte sind bei autorisierten Partnern von Ajax Systems erhältlich.

Weitere Informationen finden Sie unter ajax.systems



Über Ajax Security System

Ajax Security System ist eine free App für iOS, veröffentlicht in der App-Liste Personal Interest, die Teil von Home & Hobby ist.

Das Unternehmen, das Ajax Security System entwickelt, ist Ajax Systems Inc. Die neueste vom Entwickler veröffentlichte Version ist 3.60.

Um Ajax Security System auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-11-11 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann Ajax Security System als Malware erkennen, wenn der Download-Link defekt ist.

So installieren Sie Ajax Security System auf Ihrem iOS-Gerät:

  • Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
  • Sobald Ajax Security System im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
  • Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
  • Nachdem Ajax Security System heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
  • Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.

Programmdetails


Allgemein

Herausgeber
Veröffentlichungsdatum
2026-11-11
Sprachen
German

Kategorie

Kategorie
Unterkategorie

Systemanforderungen

Betriebssysteme
iOS

Download-Informationen

Dateigröße
829.2 MB
Gesamtdownloads
0

Preisgestaltung

Lizenzmodell
Free
Preis

Versionsgeschichte


Hier finden Sie das Changelog von Ajax Security System, seit es am 2026-10-31 auf unserer Website veröffentlicht wurde.Die neueste Version ist 3.60 und wurde am 16 November, 2026 auf Apps112 aktualisiert.Sehen Sie unten die Änderungen in jeder Version:

Version 3.60

veröffentlicht am 2026-11-11

- Das App-Design wurde auf Liquid Glass aktualisiert. Verfügbar für Nutzer mit iOS 26.
- Es wurde eine Einstellung für EN54-Systeme hinzugefügt, mit der festgelegt werden kann, wer den Alarm nach Beginn der Verzögerungszeit bestätigen kann. Die Konfiguration erfolgt in der App unter den Einstellungen der Brandwarnzentrale: Menü „Einstellungen der Brandwarnanlage“, Abschnitt „Feueralarm-Verzögerungen“. Verfügbar in Systemen mit Hub-Zentrale unter OS Malevich 2.43.

Version 3.59

veröffentlicht am 2026-10-28

- Möglichkeit zur Auswahl der von Videogeräten erkannten Objekte, die Push-Benachrichtigungen auslösen. Aktivierung unter Space-Einstellungen — Benutzerprofil.
- Beim Hinzufügen von Kameras zum NVR können Sie nun die manuelle Verbindungseinrichtung wählen. So lassen sich Kamera und NVR selbst in unterschiedlichen Netzwerken verbinden.

Version 3.58

veröffentlicht am 2026-10-15

Version History - On video wall, cameras can now be added to Favorites — for quick access and filtering of important streams. There's also a new setting for how cameras are shown on the wall: as list or grid. 3.58 13h ago - Added smoke sensor dust level information for EN54 fire detectors. This information will become available if the hub runs Malevich OS 2.43.
- Minor fixes improving app performance. 3.57 Sep 30 - Scenarios for third-party devices connected via Takeover Module. Intrusion, fire, and leakage detectors can trigger scenarios by alarm, key fobs can control automation devices. For opening detectors, added chime sounds via a siren for opening and tilt events. Available on OS Malevich 2.42+.
- For Hub BP Jeweller, added a separate activity period after a hub or any device lid state change in battery saving mode, allowing system servicing after a tamper alarm. Available on OS Malevich 2.43+. 3.56 Sep 16 - A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later.
- Minor fixes improving app performance. 3.55 Aug 31 - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 Aug 18 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025

Version 3.57

veröffentlicht am 2026-10-08

Version History - Added smoke sensor dust level information for EN54 fire detectors. This information will become available if the hub runs Malevich OS 2.43.
- Minor fixes improving app performance. 3.57 Sep 30 - Scenarios for third-party devices connected via Takeover Module. Intrusion, fire, and leakage detectors can trigger scenarios by alarm, key fobs can control automation devices. For opening detectors, added chime sounds via a siren for opening and tilt events. Available on OS Malevich 2.42+.
- For Hub BP Jeweller, added a separate activity period after a hub or any device lid state change in battery saving mode, allowing system servicing after a tamper alarm. Available on OS Malevich 2.43+. 3.56 Sep 16 - A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later.
- Minor fixes improving app performance. 3.55 Aug 31 - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 Aug 18 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025 - Minor fixes improving app performance. 3.36.1 12/02/2025

Version 3.57

veröffentlicht am 2026-10-01

Version History - Added smoke sensor dust level information for EN54 fire detectors. This information will become available if the hub runs Malevich OS 2.43.
- Minor fixes improving app performance. 3.57 1d ago - Scenarios for third-party devices connected via Takeover Module. Intrusion, fire, and leakage detectors can trigger scenarios by alarm, key fobs can control automation devices. For opening detectors, added chime sounds via a siren for opening and tilt events. Available on OS Malevich 2.42+.
- For Hub BP Jeweller, added a separate activity period after a hub or any device lid state change in battery saving mode, allowing system servicing after a tamper alarm. Available on OS Malevich 2.43+. 3.56 Sep 16 - A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later.
- Minor fixes improving app performance. 3.55 Aug 31 - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 Aug 18 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025 - Minor fixes improving app performance. 3.36.1 12/02/2025

Version 3.56

veröffentlicht am 2026-09-24

Version History - Scenarios for third-party devices connected via Takeover Module. Intrusion, fire, and leakage detectors can trigger scenarios by alarm, key fobs can control automation devices. For opening detectors, added chime sounds via a siren for opening and tilt events. Available on OS Malevich 2.42+.
- For Hub BP Jeweller, added a separate activity period after a hub or any device lid state change in battery saving mode, allowing system servicing after a tamper alarm. Available on OS Malevich 2.43+. 3.56 Sep 16 - A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later.
- Minor fixes improving app performance. 3.55 Aug 31 - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 Aug 18 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025 - Minor fixes improving app performance. 3.36.1 12/02/2025 - Support for new devices and features that will become available with upcoming hub OS update.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.36 11/13/2025

Version 3.56

veröffentlicht am 2026-09-17

Version History - Scenarios for third-party devices connected via Takeover Module. Intrusion, fire, and leakage detectors can trigger scenarios by alarm, key fobs can control automation devices. For opening detectors, added chime sounds via a siren for opening and tilt events. Available on OS Malevich 2.42+.
- For Hub BP Jeweller, added a separate activity period after a hub or any device lid state change in battery saving mode, allowing system servicing after a tamper alarm. Available on OS Malevich 2.43+. 3.56 1d ago - A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later.
- Minor fixes improving app performance. 3.55 Aug 31 - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 Aug 18 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025 - Minor fixes improving app performance. 3.36.1 12/02/2025 - Support for new devices and features that will become available with upcoming hub OS update.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.36 11/13/2025

Version 3.55

veröffentlicht am 2026-09-10

Version History - A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later.
- Minor fixes improving app performance. 3.55 Aug 31 - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 Aug 18 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025 - Minor fixes improving app performance. 3.36.1 12/02/2025 - Support for new devices and features that will become available with upcoming hub OS update.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.36 11/13/2025 - Added Entry/Exit delays setting for native video surveillance cameras (support on hubs running OS Malevich 2.34).
- Added support for new devices. We will notify you as soon as they become available for testing. 3.35 10/30/2025

Version 3.55

veröffentlicht am 2026-09-03

Version History - A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later.
- Minor fixes improving app performance. 3.55 3d ago - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 Aug 18 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025 - Minor fixes improving app performance. 3.36.1 12/02/2025 - Support for new devices and features that will become available with upcoming hub OS update.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.36 11/13/2025 - Added Entry/Exit delays setting for native video surveillance cameras (support on hubs running OS Malevich 2.34).
- Added support for new devices. We will notify you as soon as they become available for testing. 3.35 10/30/2025

Version 3.54

veröffentlicht am 2026-08-21

Version History - Support for new devices that will become available soon, and minor fixes improving app performance.
- Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later. 3.54 3d ago - Support for new devices that will become available soon, and minor fixes improving app performance. 3.53 Aug 4 - Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu.
- Line crossing notifications from video devices now include the type of object that crossed the line. 3.52 Jul 15 A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video.
To enable this feature, make sure your cameras are updated to the latest available firmware version. 3.51 Jul 1 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.50 Jun 22 - For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40.
- For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits. 3.49 Jun 4 - Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu. 3.48 May 19 - Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights.
- Fixed an issue where automation devices could not be opened from the control screen. 3.47 Apr 29 - Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu.
- For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu. 3.46 Apr 15 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.45 Mar 30 - Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings. 3.44 Mar 18 - Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38.
- Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu.
- Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38. 3.43 Mar 9 Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36). 3.42 Feb 12 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.41 Jan 29 - For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36.
- Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35. 3.40 Jan 14 Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen. 3.39.1 Jan 9 - Support for new devices that will become available soon, and minor fixes improving app performance. 3.39 Jan 5 - Minor fixes improving app performance. 3.38.1 12/22/2025 - For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders.
- Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification. 3.38 12/17/2025 - Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings).
- Ability to define which types of notifications in the feed are available to specific users (specified in user settings).
- EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version. 3.37.1 12/12/2025 - Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press.
- Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area.
- Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.37 12/08/2025 - Minor fixes improving app performance. 3.36.1 12/02/2025 - Support for new devices and features that will become available with upcoming hub OS update.
- Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version. 3.36 11/13/2025 - Added Entry/Exit delays setting for native video surveillance cameras (support on hubs running OS Malevich 2.34).
- Added support for new devices. We will notify you as soon as they become available for testing. 3.35 10/30/2025 - Support for new devices and features that will become available with upcoming hub OS update. 3.34 10/15/2025

Haftungsausschluss


Offizieller App Store-Link


Wir hosten Ajax Security System nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.

Der App-Store-Link für Ajax Security System wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.

Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.





Klicken Sie auf Sterne, um diese APP zu bewerten!

Nutzerbewertung:
  0.0/5     0
Downloads: 0
Aktualisiert am: 2026-11-16
Herausgeber: Ajax Systems Inc
Betriebssystem: iOS
Lizenztyp: Free

TOP-DOWNLOADS
letzte Woche in Haus & Hobby